[Bashir]

Сообщение от babai-70

нет не хочет пишет conect fail

Попробуй и с этим fdddddddd ALI360X Empty upgrade tool_0.rar‎ но читай внимательно и смотри на фотке.........

How to use EromUpgrade.exe
1. Connect PC and Box with RS232.
2. Open EromUpgrade.exe, and select correct “Port”, set operate mode to “Upgrade”. Click “Browse” button to select file which you want to upate, here is product_ali3606_demo.abs. You can also select “Include bootloader”.
3. Press “Next” button, it will try to connect to box. Then you should make box in “short” status, the step is to find two electrodes in board (which around by red circle in picture IMAG0250.jpg), and connect them with metal wire, then power on box.
4. Then you can see “Start downloading…” in tool, please waiting until download finished.
5. Press “Next” button, it will try to burning data to flash.